Home › BODY ELECTRICAL › OTHER SYSTEM › VOLTAGE INVERTER

VOLTAGE INVERTER > INSTALLATION

for Preparation Click here



1. INSTALL VOLTAGE INVERTER ASSEMBLY


    E232388E01
  1. Install and tighten the 2 bolts in the sequence shown in the illustration.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }



    E232389
  1. Install the 2 bolts.

    Torque:
    15 N*m{ 153 kgf*cm , 11 ft.*lbf }

  1. Connect the 2 connectors and engage the 2 wire harness clamps.

  1. Install the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }



2. INSTALL WIRING HARNESS PROTECTOR
  1. Install the bolt and wiring harness protector.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }



3. INSTALL REAR CONSOLE BOX ASSEMBLY


    B290408
  1. Engage the 4 claws and install the console box rear.

  1. Install the 2 screws <F> and 2 bolts <B>.

  1. Install the console box carpet.



4. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Manual Transmission)
  1. Engage the 4 clips and claw, and install the console upper panel sub-assembly.



5. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Automatic Transmission on Separate Seat Type)


    B290409
  1. Engage the 6 clips and claw, and install the console upper rear panel.

  1. Install the shift knob.