Home › BODY ELECTRICAL › OTHER SYSTEM › VOLTAGE INVERTER

VOLTAGE INVERTER > REMOVAL

for Preparation Click here



1. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Automatic Transmission)


    B290397
  1. Remove the shift knob.

  1. Disengage the 6 clips and claw, and remove the console upper rear panel sub-assembly.



2. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Manual Transmission)


    B085770E01
  1. Disengage the 4 clips and claw, and remove the console upper rear panel sub-assembly.



3. REMOVE REAR CONSOLE BOX ASSEMBLY


    B290398
  1. Remove the console box carpet.



    B290399
  1. Remove the 2 screws <F> and 2 bolts <B>.

  1. Disengage the 4 claws and remove the rear console box assembly.



4. REMOVE WIRING HARNESS PROTECTOR


    E211998
  1. Remove the bolt and wiring harness protector.



5. REMOVE VOLTAGE INVERTER ASSEMBLY


    E211999
  1. Remove the bolt.

  1. Disconnect the 2 connectors and disengage the 2 wire harness clamps.



    E212000
  1. Remove the 4 bolts and voltage inverter assembly.