Home › BODY › ENGINE HOOD / DOOR › TAIL GATE

TAIL GATE > REASSEMBLY

for Preparation Click here



1. INSTALL TAIL GATE HINGE ASSEMBLY LH


B088139
  1. Using a "TORX" socket wrench T40, install the tail gate hinge assembly LH with the bolt and 2 screws.

    Torque:
    18 N*m{ 178 kgf*cm , 13 ft.*lbf }



2. INSTALL TAIL GATE HINGE ASSEMBLY RH

HINT:
Use the same procedure for both the LH and RH sides.



3. INSTALL TAIL GATE STAY ASSEMBLY


B088138
  1. Using a "TORX" socket wrench T40, install the tail gate stay assembly with the screw and washer.

    Torque:
    14 N*m{ 143 kgf*cm , 10 ft.*lbf }

    HINT:
    Use the same procedure for both the LH and RH sides.



4. INSTALL TAIL GATE STAY STOPPER


B088136
  1. Using a "TORX" socket wrench T40, install the tail gate stopper with the screw.

    Torque:
    14 N*m{ 143 kgf*cm , 10 ft.*lbf }

    HINT:
    Use the same procedure for both the LH and RH sides.



5. INSTALL TAIL GATE


B088140E01
  1. Install the tail gate onto the vehicle.

    NOTICE:
    Be careful not to drop the tail gate.

    HINT:
    Install the tail gate onto the vehicle by engaging the hinge on the left side first and then the hinge on the right side.



    B088135
  1. Connect the tail gate stay.

    HINT:
    Use the same procedure for both the LH and RH sides.

  1. Connect the connector.



6. INSTALL TAIL GATE LOCK STRIKER


B088134
  1. Install the tail gate lock striker with the 2 bolts.

    Torque:
    29 N*m{ 296 kgf*cm , 21 ft.*lbf }

    HINT:
    Use the same procedure for both the LH and RH sides.



7. INSTALL TAIL GATE HANDLE ASSEMBLY


B088133E01
  1. Engage the 2 claws and install the tail gate handle assembly with the 2 bolts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }



8. INSTALL TAIL GATE LOCK ASSEMBLY LH


B088132E01
  1. Engage the clip and install the tail gate lock assembly LH with the 2 bolts and clip.

    Torque:
    29 N*m{ 269 kgf*cm , 21 ft.*lbf }



    B088409
  1. Connect the tail gate link as shown in the illustration.



9. INSTALL TAIL GATE LOCK ASSEMBLY RH

HINT:
Use the same procedure as described for the LH side.



10. INSTALL TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)


E168709
  1. Connect the connector.

  1. Install the television camera with the 2 bolts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }



11. INSTALL BACK DOOR HANDLE COVER (w/o Rear View Monitor System)


B236664
  1. Install the back door handle cover with the 2 bolts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

  1. Connect the connector.



12. INSTALL TAIL GATE SERVICE HOLE COVER


B088130
  1. Using a "TORX" socket wrench T30, install the tail gate service hole cover with the 8 screws.



13. INSTALL TAIL GATE PROTECTOR RH


B088129E01
  1. Engage the 10 claws and install the tail gate protector.



    B088128
  1. Using a "TORX" socket wrench T30, tighten the 7 tail gate protector screws.