VOLTAGE INVERTER > INSPECTION |
| 1. INSPECT VOLTAGE INVERTER ASSEMBLY |
Measure the resistance and voltage according to the value(s) in the table below.

| *a | Component with harness connected (Voltage Inverter Assembly) | - | - |
| Tester Connection | Switch Condition | Specified Condition |
| V9-2(+B) - V9-1(PGND) | Ignition switch ON | 11 to 14 V |
| V9-1(PGND) - Body ground | Always | Below 1 Ω |
| V8-5(AC1) - V9-1(PGND) | Ignition switch ON Main switch ON | Pulse generation |
| V8-11(AC2) - V9-1(PGND) | Ignition switch ON Main switch ON | Pulse generation |