Home › SUSPENSION & AXLE › AXLE › FRONT AXLE HUB (for 4WD and Pre-Runner)

FRONT AXLE HUB (for 4WD and Pre-Runner) > REASSEMBLY

for Preparation Click here



1. INSTALL FRONT AXLE HUB OIL SEAL


F042762
  1. Using a brass bar and a hammer, install a new front axle hub oil seal.

    NOTICE:
    Do not damage the oil seal.



2. INSTALL FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY


C098702E01
  1. Using SST and a press, install a new bearing onto the front axle hub.

    SST
    09649-17010  



3. INSTALL FRONT AXLE HUB


F042759
  1. Apply MP grease to a new O-ring.

  1. Install the new O-ring onto the axle hub.

  1. Install the dust cover and axle hub onto the steering knuckle with the 4 bolts.

    Torque:
    80 N*m{ 816 kgf*cm , 59 ft.*lbf }



4. INSTALL FRONT WHEEL ADJUSTING NUT (for Pre-Runner)


F042758E01
  1. Using SST, install a new front wheel adjusting nut.

    SST
    09318-12010  

    Torque:
    275 N*m{ 2,804 kgf*cm , 203 ft.*lbf }



5. INSTALL FRONT AXLE HUB OIL SEAL (for 4WD)


F042767E02
  1. Using SST and a press, install a new front axle hub oil seal.

    SST
    09527-17011  
    09950-70010   (09951-07100)
    09951-01000  



6. INSTALL KNUCKLE GREASE RETAINER CAP (for Pre-Runner)


F042765
  1. Using a brass bar and a hammer, install a new knuckle grease retainer cap.

    NOTICE:
    Do not damage the knuckle grease retainer cap.