Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT ASSEMBLY

HEADLIGHT ASSEMBLY > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. REMOVE FRONT BUMPER COVER



2. REMOVE HEADLIGHT ASSEMBLY


E212094
  1. Remove the bolt and 2 screws.

  1. Disengage the clamp and disconnect the 3 connectors to remove the headlight assembly.



3. REMOVE FRONT TURN SIGNAL LIGHT BULB


E212095
  1. Turn the front turn signal light socket with the bulb in the direction indicated by the arrow in the illustration to remove them.

  1. Remove the front turn signal light bulb from the front turn signal light socket.



4. REMOVE CLEARANCE LIGHT BULB


E212096
  1. Turn the clearance light socket with the bulb in the direction indicated by the arrow in the illustration to remove them.

  1. Remove the clearance light bulb from the clearance light socket.



5. REMOVE NO. 1 HEADLIGHT BULB


E212097
  1. Remove the socket cover.



    E212098
  1. Release the set spring lock as shown in the illustration.



    E212099
  1. Remove the No. 1 headlight bulb.

    NOTICE:
    Do not touch the bulb glass with your fingers.