Home › BODY ELECTRICAL › LIGHTING › HIGH MOUNTED STOP LIGHT ASSEMBLY

HIGH MOUNTED STOP LIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE CENTER STOP LIGHT ASSEMBLY


E076054E01
  1. Remove the 2 screws, then remove the center stop light assembly.



    E076055E01
  1. Disconnect the connector.



    E076056E01
  1. Remove the wire harness clamp.

  1. To remove the 3 center stop light sockets and bulbs, turn them in the direction indicated by the arrow in the illustration.

  1. Remove the 3 center stop light bulbs from the 3 light sockets.