Home › BODY ELECTRICAL › LIGHTING › TAILLIGHT RELAY

TAILLIGHT RELAY > INSPECTION

for Preparation Click here



1. INSPECT TAIL LIGHT RELAY


I100429E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard:
      Tester Connection
      Specified Condition
      3-5
      10 kΩ or higher
      3-5
      Below 1 Ω
      (When 1 battery voltage applied to terminals 1and 2)

      If the result is not as specified, replace the tail light relay.