Home › BODY ELECTRICAL › WIPER AND WASHER › FRONT WIPER MOTOR

FRONT WIPER MOTOR > INSPECTION

for Preparation Click here



1. INSPECT FRONT WIPER MOTOR


E113073E01
  1. Check the LO operation.

    1. Connect the battery positive (+) lead to terminal 1 (+1) of the connector and the battery negative (-) lead to terminal 5 (E), then check that the windshield wiper motor assembly operates at low speed (LO).
      If the motor does not operate, replace the windshield wiper motor assembly.

  1. Check the HI operation.

    1. Connect the battery positive (+) lead to terminal 4 (+2) of the connector and the battery negative (-) lead to terminal 5 (E), then check that the motor operates at high speed (HI).