Home › BODY ELECTRICAL › WIPER AND WASHER › FRONT WIPER RUBBER

FRONT WIPER RUBBER > INSTALLATION

for Preparation Click here



1. INSTALL FRONT WIPER RUBBER


E059361E07
  1. Install the 2 wiper rubber backing plates onto the wiper rubber LH.

    NOTICE:
    Be sure to install the wiper rubber backing plates in the correct direction.



    E057398E03
  1. Install the wiper rubber LH so that the head part (Larger side) of the wiper rubber faces the arm axle side.

    NOTICE:
    Push the front wiper blade into the grooves of the wiper rubber to engage them completely.



2. INSTALL FRONT WIPER BLADE


E076062E01
  1. Engage the claw and install the front wiper blade LH onto the front wiper arm LH.



    E076064E01
  1. Hold down the front wiper blade LH as shown in the illustration.