Home › BODY › WINDSHIELD / WINDOWGLASS › BACK WINDOW GLASS

BACK WINDOW GLASS > REMOVAL

for Preparation Click here



1. REMOVE REAR SEAT BACK HINGE COVER (for Double Cab)
  1. for RH Side:

    1. Remove the rear seat back hinge cover .

  1. for LH Side:

    1. Remove the rear seat back hinge cover .



2. REMOVE REAR SEATBACK ASSEMBLY LH (for Double Cab)


    B087195E01
  1. Remove the 2 bolts and rear seat back.



3. REMOVE REAR SEATBACK ASSEMBLY RH (for Double Cab)


    B087215E01
  1. Remove the bolt, rear seat belt outer center and floor anchor of the rear seat belt inner.



    B087217E01
  1. Remove the 2 bolts and rear seat back.



4. REMOVE REAR SEAT BACK HINGE SUB-ASSEMBLY LH (for Double Cab)


    B087196E01
  1. Remove the 2 bolts and rear seat back hinge.



5. REMOVE REAR SEAT BACK HINGE SUB-ASSEMBLY RH (for Double Cab)


    B087218E01
  1. Remove the 2 bolts and rear seat back hinge.



6. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab)


    B087476E01
  1. Disengage the 8 claws and clip, and remove the front door scuff plate.



7. REMOVE FRONT DOOR SCUFF PLATE LH (for Access Cab)


    B087436E01
  1. Disengage the 9 claws and clip, and remove the front door scuff plate.



8. REMOVE FRONT DOOR SCUFF PLATE RH (for Regular Cab)

HINT:
Follow the same procedures as for the front door scuff plate LH.



9. REMOVE FRONT DOOR SCUFF PLATE RH (for Access Cab)

HINT:
Follow the same procedures as for the front door scuff plate LH.



10. REMOVE REAR DOOR SCUFF PLATE LH (for Access Cab)


    B087439E01
  1. Disengage the 7 claws and remove the rear door scuff plate.



11. REMOVE REAR DOOR SCUFF PLATE LH (for Double Cab)


    B087412E01
  1. Disengage the 8 claws and remove the rear door scuff plate.



12. REMOVE REAR DOOR SCUFF PLATE RH (for Access Cab)

HINT:
Follow the same procedures as for the rear door scuff plate LH.



13. REMOVE REAR DOOR SCUFF PLATE RH (for Double Cab)

HINT:
Follow the same procedures as for the rear door scuff plate LH.



14. REMOVE ROOF SIDE INNER GARNISH CAP LH (for Access Cab)


    B087441E01
  1. Using a "TORX" socket wrench T30, remove the 2 screws.

  1. Disengage the 4 claws and remove the roof side inner garnish cap.



15. REMOVE ROOF SIDE INNER GARNISH CAP RH (for Access Cab)

HINT:
Follow the same procedures as for the roof side inner garnish LH.



16. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH (for Regular Cab)


    B087477E01
  1. Remove the front door opening trim weatherstrip.



17. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH (for Access Cab)


    B087442E01
  1. Remove the front door opening trim weatherstrip.



18. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for Regular Cab)

HINT:
Follow the same procedures as for the front door opening trim weatherstrip LH.



19. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for Access Cab)

HINT:
Follow the same procedures as for the front door opening trim weatherstrip LH.



20. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH (for Double Cab)


    B087414E01
  1. Remove the rear door opening trim weatherstrip.



21. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH (for Double Cab)

HINT:
Follow the same procedures as for the rear door opening trim weatherstrip LH.



22. REMOVE BACK PANEL TRIM COVER (for Regular Cab)


    B087479E01
  1. for Separate Seat Type and Bench Seat Type:

    HINT:
    Follow the same procedures as for the opposite side (for Bench Seat Type).


    1. Disengage the 6 claws and remove the back panel trim cover.



    B087478E01
  1. for Bench Seat Type:

    1. Disengage the 6 claws and remove the back panel trim cover.



23. REMOVE BACK PANEL TRIM COVER (for Access Cab)

HINT:
Follow the same procedure as for the opposite side.



    E212090
  1. Disengage the 2 claws and the 2 guides, remove the back panel trim cover.



24. REMOVE BACK PANEL TRIM COVER (for Regular Cab on Bench Seat Type)


    B087479E01
  1. for Separate Seat Type and Bench Seat Type:

    HINT:
    Follow the same procedures as for the opposite side (for Bench Seat Type).


    1. Disengage the 6 claws and remove the back panel trim cover.



    B087478E01
  1. for Bench Seat Type:

    1. Disengage the 6 claws and remove the back panel trim cover.



25. REMOVE BACK PANEL UPPER GARNISH (for Regular Cab)


    B087480E01
  1. Disengage the 4 claws and 5 clips, and remove the back panel upper garnish.



26. REMOVE JACK ASSEMBLY (for Regular Cab on Separate Seat Type)


27. REMOVE BACK PANEL TRIM COVER (for Regular Cab on Separate Seat Type)


    B087481E01
  1. Remove the 2 clips.

  1. Disengage the 4 claws and remove the back panel trim cover.



28. REMOVE BACK PANEL TRIM (for Regular Cab on Separate Seat Type)


    B087482E01
  1. Remove the 4 clips and back panel trim.



29. REMOVE BACK PANEL TRIM (for Access Cab on Separate Seat Type)


    E212020
  1. Remove the 2 clips.

  1. Disengage the 8 claws and 14 clips, and remove the back panel trim.



30. REMOVE LUGGAGE COMPARTMENT SIDE TRAY (for Double Cab)


    B087579E01
  1. Remove the 3 bolts.

  1. Disengage the 8 claws and 3 clips, and remove the luggage compartment side tray.



31. REMOVE REAR SEAT BACK CENTER HINGE SUB-ASSEMBLY (for Double Cab)


    B087197E01
  1. Remove the 2 bolts and rear seat back center hinge.



32. REMOVE LUGGAGE COMPARTMENT SIDE TRAY (for Double Cab)


    B087580E01
  1. w/ Woofer:

    1. Remove the bolt.

    2. Disengage the 5 claws and 7 clips, and remove the luggage compartment side tray.



    B087581E01
  1. w/o Woofer:

    1. Remove the 3 bolts.

    2. Disengage the 5 claws and 5 clips, and remove the luggage compartment side tray.



33. REMOVE QUARTER TRIM LOWER PANEL LH (for Regular Cab)


    B087483E01
  1. Disengage the 2 claws and 3 clips, and remove the quarter trim lower panel.



34. REMOVE QUARTER TRIM LOWER PANEL LH (for Access Cab)


    B205284
  1. Remove the bolt and floor anchor of the rear seat belt outer.



    B205285
  1. Disengage the claw and 2 clips, and remove the quarter trim lower panel.



35. REMOVE QUARTER TRIM LOWER PANEL LH (for Double Cab)


    B087419E01
  1. Disengage the 2 claws and 2 clips, and remove the quarter trim lower panel.



36. REMOVE QUARTER TRIM LOWER PANEL RH (for Regular Cab)

HINT:
Follow the same procedures as for the quarter trim panel lower LH.



37. REMOVE QUARTER TRIM LOWER PANEL RH (for Access Cab)

HINT:
Follow the same procedures as for the quarter trim panel lower LH.



38. REMOVE QUARTER TRIM LOWER PANEL RH (for Double Cab)

HINT:
Follow the same procedures as for the quarter trim panel lower LH.



39. REMOVE ROOF SIDE INNER GARNISH LH (for Access Cab)


    B087451E01
  1. Disengage the 2 claws and clip, and remove the roof side inner garnish.



40. REMOVE ROOF SIDE INNER GARNISH RH (for Access Cab)

HINT:
Follow the same procedures as for the roof side garnish inner LH.



41. REMOVE QUARTER INSIDE TRIM BOARD LH (for Regular Cab)


    B087324E01
  1. for LH Side and Separate Seat Type RH side:

    1. Remove the bolt and the floor anchor of the front seat outer belt.



    B290463
  1. for Bench Seat Type RH Side:

    1. Remove the bolt and the floor anchor of the front seat outer belt.

    2. Disconnect the belt tension sensor connector.

    3. Remove the wiring harness clamp.



    B087484E03
  1. Using a screwdriver with its tip taped in protective tape, disengage the claw and open the cover.
    Text in Illustration 
    *1
    Protective Tape



    B087485E01
  1. Remove the 3 screws.

  1. Disengage the 2 clips and remove the quarter trim board.



42. REMOVE QUARTER INSIDE TRIM BOARD LH (for Access Cab)


    B087452E03
  1. Using a screwdriver with its tip taped in protective tape, disengage the claw and open the cover.
    Text in Illustration 
    *1
    Protective Tape



    B087453E01
  1. Remove the screw.

  1. Disengage the 3 clips and remove the quarter inside trim board.



43. REMOVE QUARTER INSIDE TRIM BOARD LH (for Double Cab)


    B087324E01
  1. Remove the bolt and remove the floor anchor of the rear seat belt outer.

    HINT:
    Follow the same procedures as for the opposite side.



    B087420E03
  1. Using a screwdriver with its tip taped in protective tape, disengage the claw and open the cover.
    Text in Illustration 
    *1
    Protective Tape



    B087421E01
  1. Remove the 3 screws.

  1. Disengage the 2 clips and remove the quarter inside trim board.



44. REMOVE QUARTER INSIDE TRIM BOARD RH (for Regular Cab)

HINT:
Follow the same procedures as for the quarter inside trim board LH.



45. REMOVE QUARTER INSIDE TRIM BOARD RH (for Access Cab)

HINT:
Follow the same procedures as for the quarter inside trim board LH.



46. REMOVE QUARTER INSIDE TRIM BOARD RH (for Double Cab)

HINT:
Follow the same procedures as for the quarter inside trim board LH.



47. REMOVE COAT HOOK (for Regular Cab)

HINT:
Follow the same procedures as for the opposite side.



    B087459E02
  1. Turn the coat hook 90° counterclockwise and remove it.



48. REMOVE COAT HOOK (for Access Cab)

HINT:
Follow the same procedures as for the opposite side.



    B087459E02
  1. Turn the coat hook 90° counterclockwise and remove it.



49. REMOVE COAT HOOK (for Double Cab)

HINT:
Follow the same procedures as for the opposite side.



    B087459E02
  1. Turn the coat hook 90° counterclockwise and remove it.



50. REMOVE BACK WINDOW ASSEMBLY


    B087624E01
  1. Remove the 2 nuts.



    B087627E01
  1. Apply protective tape to the outer circumference of the back window, as shown in the illustration.

  1. From the interior, insert piano wires between the vehicle body and back window, as shown in the illustration.

  1. Tie objects that can serve as handles (for example, wooden blocks) to all wire ends.

    NOTICE:
    When separating the back window from the vehicle, be careful not to damage the vehicle's paint or exterior/interior ornaments.

  1. Cut through the adhesive by pulling the piano wire around the back window.



    B087626E01
  1. Disengage the 2 clips.

  1. Using suction cups, remove the back window.

    NOTICE:
    Leave as much adhesive on the vehicle body as possible when removing the back window.