OUTER REAR VIEW MIRROR > INSTALLATION |
| 1. INSTALL OUTER REAR VIEW MIRROR |
![]() |
Engage the 2 claws into the outer rear view mirror.
Engage the 2 claws and install the outer rear view mirror.
| 2. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY |
![]() |
Engage the claw and install the outer rear view mirror.
Tighten the 3 nuts.
Connect the outer rear view mirror connector (w/ Power Mirror).
| 3. INSTALL FRONT DOOR TRIM PANEL ASSEMBLY (w/ Power Window) |
![]() |
Engage the 10 clips and install the front door trim panel assembly LH.
![]() |
Install the 2 screws.
![]() |
Close the cover.
| 4. INSTALL FRONT DOOR TRIM PANEL ASSEMBLY (w/o Power Window) |
![]() |
Engage the 10 clips and install the front door trim panel assembly LH.
![]() |
Install the 3 screws.
![]() |
Engage the 8 claws and install the door assist grip cover LH.
![]() |
Close the cover.
| 5. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Double Cab) |
![]() |
Connect the connector.
Engage the 3 claws and clip, and install the power window regulator master switch assembly.
| 6. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Access Cab) |
![]() |
Connect the connector.
Engage the 3 claws and clip, and install the power window regulator master switch assembly.
| 7. INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY |
![]() |
Install the window regulator handle plate.
![]() |
Install the front door window regulator handle assembly with the snap ring.
| 8. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH (w/ Power Window) |
![]() |
Engage the 3 clips and install the front lower frame bracket garnish LH.
| 9. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH (w/o Power Window) |
![]() |
Engage the 3 clips and install the front door lower frame bracket garnish LH.
| 10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |