Home › BODY › MIRROR › OUTER REAR VIEW MIRROR

OUTER REAR VIEW MIRROR > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH (w/ Power Window)


B088092E01
  1. Disengage the 3 clips and remove the front door lower frame bracket garnish LH.

    NOTICE:
    Confirm that no clips remain on the door panel when the garnish is removed. Transfer any remaining clips to the garnish side before installing.



3. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH (w/o Power Window)


B088092E01
  1. Disengage the 3 clips and remove the front door lower frame bracket garnish LH.

    NOTICE:
    Confirm that no clips remain on the door panel when the garnish is removed. Transfer any remaining clips to the garnish side before installing.



4. REMOVE FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY


    B088112
  1. Pull out the snap ring with a cloth as shown in the illustration, then remove the door window regulator handle assembly.



    B088113
  1. Remove the window regulator handle plate.



5. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Double Cab)


B088093E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and clip, then remove the power window regulator master switch assembly.

  1. Disconnect the connector.



6. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Access Cab)


B088094E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and clip, then remove the power window regulator master switch assembly.

  1. Disconnect the connector.



7. REMOVE FRONT DOOR TRIM PANEL ASSEMBLY (w/ Power Window)


B088405E01
  1. Using a screwdriver with its tip wrapped in protective tape, open the cover.



    B088096
  1. Remove the 2 screws.



    B088097E01
  1. Disengage the 10 clips and remove the front door trim panel assembly LH.



8. REMOVE FRONT DOOR TRIM PANEL ASSEMBLY (w/o Power Window)


B088114E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 8 claws and remove the door assist grip cover LH.



    B088405E01
  1. Using a screwdriver with its tip wrapped in protective tape, open the cover.



    B088115
  1. Remove the 3 screws.



    B088116E01
  1. Disengage the 10 clips and remove the front door trim panel assembly LH.



9. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY


B087556E01
  1. Disconnect the outer rear view mirror connector (w/ Power mirror).

  1. Remove the 3 nuts.

  1. Disengage the claw and remove the outer rear view mirror.



10. REMOVE OUTER REAR VIEW MIRROR


B087557E01
  1. Apply protective tape to the outer circumference of the outer rear view mirror, as shown in the illustration.

  1. Using a screwdriver with its tip taped in protective tape, disengage the 2 claws.

  1. Disengage the 2 claws and remove the outer rear view mirror.