Home › BRAKE › BRAKE › FRONT BRAKE (for 2WD)

FRONT BRAKE (for 2WD) > DISASSEMBLY

for Preparation Click here



1. REMOVE CYLINDER BOOT


F051227
  1. Using a screwdriver, remove the cylinder boot.



2. REMOVE FRONT DISC BRAKE PISTON


F051228
  1. Place a shop rag or equivalent between the disc brake piston and disc brake cylinder.

  1. Use compressed air to remove the disc brake piston from the disc brake cylinder.

    CAUTION:
    Be careful not to place your fingers in front of the piston when using compressed air.

    NOTICE:
    Be careful not to spatter the brake fluid.



3. REMOVE PISTON SEAL


F051229
  1. Using a screwdriver, remove the piston seal from the front disc brake cylinder.

    NOTICE:
    Be careful not to damage the inner cylinder or cylinder groove.



4. REMOVE FRONT DISC BRAKE BLEEDER PLUG