Home › BRAKE › PARKING BRAKE › PARKING BRAKE LEVER (for Manual Transmission)

PARKING BRAKE LEVER (for Manual Transmission) > INSTALLATION

for Preparation Click here



1. INSTALL PARKING BRAKE LEVER


F050702E01
  1. Install the parking brake lever assembly with the 2 bolts.

    Torque:
    6.0 N*m{ 61 kgf*cm , 53 in.*lbf }

  1. Install the sleeve with the pin and clip.



2. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER NO. 1
  1. Connect the connectors.

  1. Engage the 3 clips and install the lower NO. 1 instrument panel finish panel sub-assembly.

  1. Install the 2 bolts <B>.



3. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    B088394
  1. Connect the hood lock control cable assembly.



    B088397E01
  1. Engage the 2 claws and install the hood lock control lever sub-assembly.



4. INSTALL INSTRUMENT PANEL HOLE COVER
  1. Engage the 4 clips and install the instrument panel hole cover.



5. INSTALL COWL SIDE TRIM BOARD (for Regular Cab)
  1. Engage the 2 clips and install the cowl side trim board.

  1. Install the clip.



6. INSTALL COWL SIDE TRIM BOARD (for Access Cab)
  1. Engage the 2 clips and install the cowl side trim board.

  1. Install the clip.



7. INSTALL COWL SIDE TRIM BOARD (for Double Cab)
  1. Engage the 2 clips and install the cowl side trim board.

  1. Install the clip.



8. INSTALL FRONT FLOOR FOOTREST


    B087437E01
  1. Engage the 2 clips and install the front floor footrest.



9. INSTALL FRONT DOOR SCUFF PLATE (for Regular Cab)
  1. Engage the 8 claws and clip, and install the front door scuff plate.



10. INSTALL FRONT DOOR SCUFF PLATE (for Access Cab)
  1. Engage the 9 claws and clip, and install the front door scuff plate.



11. INSTALL FRONT DOOR SCUFF PLATE (for Double Cab)
  1. Engage the 9 claws and install the front door scuff plate.



12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

(Click here)