PARKING BRAKE LEVER (for Manual Transmission) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT DOOR SCUFF PLATE (for Regular Cab) |
![]() |
Disengage the 8 claws and clip, and remove the front door scuff plate.
| 3. REMOVE FRONT DOOR SCUFF PLATE (for Access Cab) |
![]() |
Disengage the 9 claws and clip, and remove the front door scuff plate.
| 4. REMOVE FRONT DOOR SCUFF PLATE (for Double Cab) |
![]() |
Disengage the 9 claws and remove the front door scuff plate.
| 5. REMOVE FRONT FLOOR FOOTREST |
![]() |
Disengage the 2 clips and remove the front floor footrest.
| 6. REMOVE COWL SIDE TRIM BOARD (for Regular Cab) |
![]() |
Remove the clip.
Disengage the 2 clips and remove the cowl side trim board.
| 7. REMOVE COWL SIDE TRIM BOARD (for Access Cab) |
![]() |
Remove the clip.
Disengage the 2 clips and remove the cowl side trim board.
| 8. REMOVE COWL SIDE TRIM BOARD (for Double Cab) |
![]() |
Remove the clip.
Disengage the 2 clips and remove the cowl side trim board.
| 9. REMOVE INSTRUMENT PANEL HOLE COVER |
![]() |
Disengage the 4 clips and remove the instrument panel hole cover.
| 10. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY |
![]() |
Disengage the 2 claws.
![]() |
Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.
| 11. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER NO. 1 |
![]() |
Remove the 2 bolts <B>.
Disengage the 3 clips and remove the lower No. 1 instrument panel finish panel.
Disconnect the connectors.
| 12. REMOVE PARKING BRAKE LEVER |
Release the parking brake lever.
![]() |
Remove the clip and pin and separate the sleeve.
Remove the 2 bolts and parking brake lever assembly.