Home › BRAKE › PARKING BRAKE › PARKING BRAKE PEDAL (for Automatic Transmission)

PARKING BRAKE PEDAL (for Automatic Transmission) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE PARKING BRAKE CABLE ASSEMBLY NO. 1


F050656E01
  1. Disengage the claw (labeled A).

  1. Remove the lock nut (labeled B), adjusting nut (labeled C), clip (labeled D) and parking brake cable assembly No. 1.



3. REMOVE PARKING BRAKE PEDAL
  1. Release the parking brake pedal.

  1. Disconnect the parking brake switch connector.



    F050701E01
  1. Remove the 3 nuts and parking brake control pedal assembly.



4. REMOVE PARKING BRAKE SWITCH ASSEMBLY
  1. Remove the screw and parking brake switch assembly.



5. REMOVE PARKING PEDAL PAD