Home › TRANSMISSION ยท CLUTCH › CLUTCH RELEASE CYLINDER (for R155F)

CLUTCH RELEASE CYLINDER (for R155F) > INSTALLATION

for Preparation Click here



1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY


F051051E01
  1. Install the clutch release cylinder with the 2 bolts.

    Torque:
    12 N*m{ 120 kgf*cm , 8.7 ft.*lbf }



2. CONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE


F051084E03
  1. Using a union nut wrench, connect the flexible hose tube.



3. BLEED CLUTCH PIPE LINE
  1. Fill the brake reservoir tank with brake fluid and bleed the clutch system.

    Torque:
    11 N*m{ 110 kgf*cm , 8.0 ft.*lbf }



4. CHECK FOR CLUTCH FLUID LEAKAGE