Home › TRANSMISSION ยท CLUTCH › CLUTCH RELEASE CYLINDER (for RA60)

CLUTCH RELEASE CYLINDER (for RA60) > INSTALLATION

for Preparation Click here



1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY


F050800
  1. Install the clutch release cylinder with the 2 bolts.

    Torque:
    12 N*m{ 120 kgf*cm , 8.7 ft.*lbf }



2. CONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE


F050799E02
  1. Using union nut wrench, connect the flexible hose tube.

    SST
    09023-00101  

    Torque:
    15 N*m{ 155 kgf*cm , 11 ft.*lbf }

  1. Install the clutch line bracket.

    Torque:
    12 N*m{ 120 kgf*cm , 8.7 ft.*lbf }



3. BLEED CLUTCH PIPE LINE
  1. Fill the brake reservoir tank with brake fluid and bleed the clutch system.

    Torque:
    11 N*m{ 110 kgf*cm , 8.0 ft.*lbf }



4. CHECK FOR CLUTCH FLUID LEAKAGE


5. INSTALL NO. 1 CLUTCH HOUSING COVER


F050796
  1. Install the clutch housing cover No. 1 with the 3 bolts.

    Torque:
    12 N*m{ 120 kgf*cm , 8.7 ft.*lbf }