Home › TRANSMISSION ยท CLUTCH › CLUTCH RELEASE CYLINDER (for RA60)

CLUTCH RELEASE CYLINDER (for RA60) > REMOVAL

for Preparation Click here



1. DRAIN CLUTCH FLUID


2. REMOVE NO. 1 CLUTCH HOUSING COVER


F050796
  1. Remove the 3 bolts and clutch housing cover No. 1.



3. DISCONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE


F050799E02
  1. Using union nut wrench, disconnect the flexible hose tube.

  1. Remove the bolt and clutch line bracket.

    HINT:
    Use a container to catch the fluid.



4. REMOVE CLUTCH RELEASE CYLINDER ASSEMBLY


F050800
  1. Remove the 2 bolts and pull out the clutch release cylinder.