Home › ENGINE ยท 1GR-FE › EMISSION CONTROL › AIR PUMP (w/ Secondary Air Injection System)

AIR PUMP (w/ Secondary Air Injection System) > INSTALLATION

for Preparation Click here



1. INSTALL AIR PUMP ASSEMBLY
  1. Engage the 3 fittings of the air pump insulator, and install the air pump onto the bracket.

  1. Connect the 2 wire harness clamps.

  1. Install the air pump with bracket with the 3 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the air pump connector.



    A261801E01
  1. Connect the No. 1 air injection system hose as shown in the illustration.
    Text in Illustration 
    *a
    Upper
    *b
    Paint Mark



2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }