Home › ENGINE ยท 1GR-FE › EMISSION CONTROL › AIR PUMP (w/ Secondary Air Injection System)

AIR PUMP (w/ Secondary Air Injection System) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE AIR PUMP ASSEMBLY


    A261626
  1. Disconnect the No. 1 air injection system hose.



    A261627
  1. Disconnect the air pump connector.



    A261687
  1. Remove the 3 bolts, then remove the air pump with bracket.



    A261688
  1. Disconnect the 2 wire harness clamps.



    A261689
  1. Disengage the 3 fittings of the air pump insulator, and remove the air pump from the bracket.