CLUTCH UNIT (for R155F) > INSPECTION |
| 1. INSPECT CLUTCH DISC ASSEMBLY |
![]() |
Using vernier calipers, measure the rivet head depth.
Install the clutch disc assembly onto the transaxle assembly.
![]() |
Using a dial indicator, check the clutch disc assembly runout.
| 2. INSPECT CLUTCH COVER ASSEMBLY |
![]() |
Using vernier calipers, inspect the depth and width of wear of the diaphragm spring.
| 3. INSPECT FLYWHEEL SUB-ASSEMBLY |
![]() |
Using a dial indicator, inspect the flywheel sub-assembly runout.
| 4. INSPECT CLUTCH RELEASE BEARING ASSEMBLY |
![]() |
Turn the release bearing by hand while applying force in the axial direction.