CLUTCH ACCUMULATOR (for RA60F) > INSTALLATION |
| 1. INSTALL CLUTCH ACCUMULATOR ASSEMBLY |
![]() |
Using union nut wrench, connect the 2 flexible hose tubes to the clutch accumulator.
![]() |
Install the clutch accumulator with the 3 bolts.
![]() |
Using union nut wrench, tighten the 2 flexible hose tubes.
| 2. INSTALL NO. 1 CLUTCH HOUSING COVER |
![]() |
Install the clutch housing cover No. 1 with the 3 bolts.
| 3. BLEED CLUTCH PIPE LINE |
Fill the brake reservoir tank with the brake fluid and bleed the clutch system.
| 4. CHECK FOR CLUTCH FLUID LEAKAGE |