INPUT SHAFT > DISASSEMBLY |
| 1. REMOVE NO. 2 SYNCHRONIZER RING |
![]() |
Remove synchronizer ring No. 2 from the input shaft.
| 2. REMOVE INPUT SHAFT BEARING |
![]() |
Remove the input shaft bearing from the input shaft.
| 3. REMOVE FRONT BEARING SHAFT SNAP RING |
![]() |
Using a snap ring expander, remove the front bearing shaft snap ring from the input shaft.
| 4. REMOVE INPUT SHAFT FRONT BEARING |
![]() |
Using SST and a press, remove the input shaft front bearing FR from the input shaft.