Home › BODY › MIRROR › OUTER REAR VIEW MIRROR

OUTER REAR VIEW MIRROR > INSPECTION

for Preparation Click here



1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH


B087561E01
  1. Check the operation.

    1. Apply battery voltage to the terminals and check the operation of the mirror face, as shown in the table and illustration.

      Standard:
      Measurement Condition
      Mirror Operation
      Battery positive (+) - 3 (MV)
      Battery negative (-) - 1 (M+)
      Turns upward (A)
      Battery positive (+) - 1 (M+)
      Battery negative (-) - 3 (MV)
      Turns downward (B)
      Battery positive (+) - 2 (MH)
      Battery negative (-) - 1 (M+)
      Turns left (C)
      Battery positive (+) - 1 (M+)
      Battery negative (-) - 2 (MH)
      Turns right (D)

      If the result is not as specified, replace the outer rear view mirror.



2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH


B087560E01
  1. Check the operation.

    1. Apply battery voltage to the terminals and check the operation of the mirror face, as shown in the table and illustration.

      Standard:
      Measurement Condition
      Mirror Operation
      Battery positive (+) - 3 (MV)
      Battery negative (-) - 1 (M+)
      Turns upward (A)
      Battery positive (+) - 1 (M+)
      Battery negative (-) - 3 (MV)
      Turns downward (B)
      Battery positive (+) - 2 (MH)
      Battery negative (-) - 1 (M+)
      Turns left (C)
      Battery positive (+) - 1 (M+)
      Battery negative (-) - 2 (MH)
      Turns right (D)

      If the result is not as specified, replace the outer rear view mirror.