HEATED OXYGEN SENSOR > INSPECTION |
| 1. INSPECT HEATED OXYGEN SENSOR |
![]() |
Check the resistance. (Bank 1 Sensor 2)
Using an ohmmeter, measure the resistance between the terminals.
| Tester Connection | Specified Condition |
| 1 (HT1B) - 2 (+B) | 11 to 16 Ω at 20°C (68°F) |
| 1 (HT1B) - 4 (E2) | 10 kΩ or higher |
Check the resistance. (Bank 2 Sensor 2)
Using an ohmmeter, measure the resistance between the terminals.
| Tester Connection | Specified Condition |
| 1 (HT2B) - 2 (+B) | 11 to 16 Ω at 20°C (68°F) |
| 1 (HT2B) - 4 (E2) | 10 kΩ or higher |