Home › ENGINE ยท 2TR-FE › CHARGING › GENERATOR

GENERATOR > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE FAN & GENERATOR V BELT


G038203E01
  1. Turning the hexagonal bolt on the V-ribbed belt tensioner clockwise, loosen and then remove the V belt.



3. REMOVE GENERATOR ASSEMBLY


G038188E01
  1. Remove the terminal cap.

  1. Remove the nut, then remove the generator wire.

  1. Disconnect the generator connector.



    G038189E01
  1. Remove the 2 bolts, then remove the generator.