RADIATOR > REASSEMBLY |
| 1. INSTALL UPPER RADIATOR TANK |
![]() |
Install the new radiator tank.
Tap the core plate with a soft-faced hammer until there is no gap between the core plate and radiator tank.
| 2. INSTALL LOWER RADIATOR TANK |
| 3. ASSEMBLE SST |
![]() |
Install the punch assembly into the overhaul handle by inserting it into the hole in part A as shown in the illustration.
While gripping the handle, adjust the stopper bolt so that dimension B is as shown in the illustration.
| 4. CAULK CORE PLATE |
![]() |
Gently press SST against the core plate in the order shown in the illustration. After repeating this a few times, fully caulk the core plate by gripping the handle until stopped by the stopper bolt.
![]() |
Check the core plate height (H) after completing the caulking.
| 5. INSTALL RADIATOR DRAIN COCK |
Install a new O-ring onto the drain cock plug.
Install the drain cock plug.