Home › ENGINE · 2TR-FE › ENGINE CONTROL SYSTEM › CAMSHAFT POSITION SENSOR

CAMSHAFT POSITION SENSOR > INSPECTION

for Preparation Click here



1. INSPECT CAMSHAFT POSITION SENSOR


G037727E18
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard:
      Tester Connection
      Specified Condition
      1 (G+) - 2 (G-)
      835 to 1,400 Ω at COLD
      1 (G+) - 2 (G-)
      1,060 to 1,645 Ω at HOT

      HINT:
      Cold and Hot mean the temperature of the coils themselves. Cold is from -10 to 50°C (14 to 122°F) and Hot is from 50 to 100°C (122 to 212°F).

      If the result is not as specified, replace the camshaft position sensor.