Home › BODY ELECTRICAL › LIGHTING › TOWING CONVERTER RELAY

TOWING CONVERTER RELAY > INSTALLATION

for Preparation Click here



1. INSTALL TOWING CONVERTER RELAY
  1. Connect the connector.

  1. Install the towing converter relay with the 2 bolts.

    Torque:
    6.7 N*m{ 68 kgf*cm , 59 in.*lbf }



2. INSTALL LOWER INSTRUMENT PANEL LH
  1. Install the lower instrument panel LH with the 3 bolts <B>.



3. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
  1. Connect the connectors.

  1. Engage the 3 clips and install the lower NO. 1 instrument panel finish panel sub-assembly.

  1. Install the 2 bolts <B>.



4. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    B088394
  1. Connect the hood lock control cable assembly.



    B088397E01
  1. Engage the 2 claws and install the hood lock control lever sub-assembly.



5. INSTALL INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake)
  1. Engage the 4 clips and install the instrument panel hole cover.



6. INSTALL INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake)
  1. Engage the 4 clips and 2 claws, and install the instrument panel under tray.



7. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH


8. INSTALL COWL SIDE TRIM BOARD LH (for Regular Cab)
  1. Engage the 2 clips and install the cowl side trim board.

  1. Install the clip.



9. INSTALL COWL SIDE TRIM BOARD LH (for Access Cab)
  1. Engage the 2 clips and install the cowl side trim board.

  1. Install the clip.



10. INSTALL COWL SIDE TRIM BOARD LH (for Double Cab)
  1. Engage the 2 clips and install the cowl side trim board.

  1. Install the clip.



11. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab)
  1. Engage the 8 claws and clip, and install the front door scuff plate.



12. INSTALL FRONT DOOR SCUFF PLATE LH (for Access Cab)
  1. Engage the 9 claws and clip, and install the front door scuff plate.



13. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab)
  1. Engage the 9 claws and install the front door scuff plate.



14. INSTALL FRONT FLOOR FOOTREST


    B087437E01
  1. Engage the 2 clips and install the front floor footrest.