DRIVE BELT > INSTALLATION |
| 1. INSTALL FAN & GENERATOR V BELT |
![]() |
Provisionally install the V belt onto each pulley.
Turn the hexagonal bolt on the V-ribbed belt tensioner clockwise and install the V belt onto the V-ribbed belt tensioner pulley.
| 2. INSPECT FAN & GENERATOR V BELT |
![]() |
Visually check the belt for excessive wear, frayed cords, etc..
![]() |
Check that the tensioner indicator mark is within range A shown in the illustration. If the mark is not within range A, replace the V belt.