Home › ENGINE ยท 1GR-FE › ENGINE MECHANICAL › ENGINE UNIT

ENGINE UNIT > REPAIR

for Preparation Click here



1. REPAIR VALVE SEAT


A062787E04

NOTICE:
Use a cutter to gradually make the intake valve seat smoother.

  1. If the seating is too high on the valve face, use 30° and 45° cutters to correct the seat.



    A075613E03
  1. Intake side:
    If the seating is too low on the valve face, use 60° and 45° cutters to correct the seat.



    A062788E03
  1. Exhaust side:
    If the seating is too low on the valve face, use 75° and 45° cutters to correct the seat.



    A075614E01
  1. Lap the valve and valve seat with an abrasive compound by hand.

  1. After lapping, clean the valve and valve seat.