Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › SEAT POSITION SENSOR (for Separate Seat Type)

SEAT POSITION SENSOR (for Separate Seat Type) > REMOVAL

for Preparation Click here



1. PRECAUTION


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.


3. REMOVE SEAT TRACK COVER


B087374E01

HINT:
Follow the same procedures as for the opposite side.

  1. Disengage the 2 claws and remove the seat track cover.



4. REMOVE FRONT SEAT ASSEMBLY


    B087646E01
  1. Disconnect the 2 connectors.

  1. Disconnect the airbag connector.

  1. Using a clip remover, remove the wire harness clamp.



    B087375E01
  1. Remove the 4 bolts and front seat.



5. REMOVE SEAT POSITION SENSOR


F051308
  1. Disconnect the connector from the seat position sensor.

  1. Using a "torx" socket wrench (T30), remove the "torx" screw and the seat position sensor.