Home › BRAKE › BRAKE CONTROL › VEHICLE STABILITY CONTROL SYSTEM (for Vacuum Brake Booster)

VEHICLE STABILITY CONTROL SYSTEM (for Vacuum Brake Booster) > SYSTEM DIAGRAM

for Preparation Click here



C247304E02


C247305E02


Communication Table 
Transmitting ECU
(transmitter)
Receiving ECU
Signals
Communication Method
ECM
Skid control ECU
  1. Throttle position signal
  2. Engine speed signal
  3. Accelerator pedal position signal
  4. Intake air temperature sensor signal
  5. Ambient air temperature signal
  6. Engine coolant temperature signal
  7. Vehicle information
CAN communication system
Skid control ECU
ECM
  1. Throttle opening angle request signal
  2. VSC data signal
CAN communication system
Yaw rate and deceleration sensor
Skid control ECU
Yaw rate and deceleration signal
CAN communication system
Steering angle sensor
Skid control ECU
Steering angle signal
CAN communication system
Skid control ECU
Combination meter assembly
  1. Warning/indicator light signal
  2. Vehicle speed signal
  3. Warning buzzer request signal
CAN communication system