Home › BRAKE › BRAKE CONTROL › VEHICLE STABILITY CONTROL SYSTEM (for Hydraulic Brake Booster)

DTC    43    ABS Control System Malfunction

for Preparation Click here


DESCRIPTION

This DTC is output when the VSC system detects a malfunction in the ABS system. When DTC 43 is stored, there is no malfunction in the skid control ECU (master cylinder solenoid).

DTC No.
DTC Detecting Condition
Trouble Areas
43
ABS control system abnormal
ABS control system

INSPECTION PROCEDURE

1.CHECK DTC (ABS)
  1. Clear the DTC (Click here).

  1. Turn the ignition switch to ON.

  1. Check if the relating to ABS control system DTC is recorded (Click here).

    Result
    Proceed to
    DTC output (relating to ABS control system DTC)
    A
    DTC not output (relating to ABS control system DTC)
    B



B
END
A

REPAIR CIRCUITS INDICATED BY OUTPUT DTCS (Click here)