Home › TRANSMISSION · A750E AUTOMATIC TRANSMISSION › AUTOMATIC TRANSMISSION SYSTEM

AUTOMATIC TRANSMISSION SYSTEM > TERMINALS OF ECM

for Preparation Click here



C186154E01

HINT:
The standard voltage and resistance of each ECM terminal is shown in the table below.
In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage and resistance between the terminals is shown under "Specified Condition".
Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
E9-23 (3) - E11-12 (E1)
Y - BR
3 shift position switch signal
Ignition switch ON
Shift lever in 3
11 to 14 V
Ignition switch ON
Shift lever not in 3
Below 1 V
E9-24 (2) - E11-12 (E1)
R-Y - BR
2 shift position switch signal
Ignition switch ON
Shift lever in 2 or L
11 to 14 V
Ignition switch ON
Shift lever not in 2 and L
Below 1 V
E9-27 (D) - E11-12 (E1)
L-B - BR
D shift position switch signal
Ignition switch ON
Shift lever in D or 4
11 to 14 V
Ignition switch ON
Shift lever not in D and 4
Below 1 V
E9-28 (R) - E11-12 (E1)
R - BR
R shift position switch signal
Ignition switch ON
Shift lever in R
11 to 14 V
Ignition switch ON
Shift lever not in R
Below 1 V
E9-29 (N) - E11-12 (E1)
L-W - BR
N shift position switch signal
Ignition switch ON
Shift lever in N
11 to 14 V
Ignition switch ON
Shift lever not in N
Below 1 V
E9-31 (SR) - E11-12 (E1)
G - BR
SR solenoid signal
5th gear
11 to 14 V
1st gear
Below 1 V
E9-33 (S2) - E11-12 (E1)
L-W - BR
S2 solenoid signal
2nd or 3rd gear
11 to 14 V
1st, 4th or 5th gear
Below 1 V
E9-35 (P) - E11-12 (E1)
G-B - BR
P shift position switch signal
Ignition switch ON
Shift lever in P
11 to 14 V
Ignition switch ON
Shift lever not in P
Below 1 V
E10-2 (NSW) - E11-12 (E1)
V - BR
Park/Neutral position switch signal
Ignition switch ON
Shift lever in P or N
Below 2 V
Ignition switch ON
Shift lever not in P and N
11 to 14 V
E10-31 (SL2+) - E11-34 (SL2-)
W-L - G-R
SL2 solenoid signal
Engine idling speed
Pulse generation
E10-33 (SLU+) - E10-32 (SLU-)
Y-B - LG
SLU solenoid signal
5th (lock-up) gear
Pulse generation
E10-34 (SLT+) - E10-35 (SLT-)
G-B - R-B
SLT solenoid signal
Engine is idling
Pulse generation
E10-36 (S1) - E11-12 (E1)
W-G - BR
S1 solenoid signal
1st or 2nd gear
11 to 14 V
3rd, 4th or 5th gear
Below 1 V
E11-3 (NT+) - E11-4 (NT-)
Y-R - W-R
Speed sensor (NT) signal
Engine is idling
Pulse generation
(See waveform 1)
E11-5 (THO1) - E10-8 (ETHW)
Y-B - BR
No. 1 ATF temperature sensor signal
ATF temperature: 115°C (239°F) or more
Below 1.5 V
E11-9 (SP2+) - E11-10 (SP2-)
G - L-R
Speed sensor (SP2) signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(See waveform 2)
E11-11 (THO2) - E10-8 (ETHW)
GR - BR
No. 2 ATF temperature sensor signal
ATF temperature: 115°C (239°F) or more
Below 1.5 V
E11-12 (E1) - Body ground
BR - Body ground
Ground
Always
Below 1 Ω
E11-33 (SL1+) - E11-32 (SL1-)
G-W - P-L
SL1 solenoid signal
Engine idling speed
Pulse generation
E14-23 (L) - E11-12 (E1)
G-Y - BR
L shift position switch signal
Ignition switch ON
Shift lever in L
11 to 14 V
Ignition switch ON
Shift lever not in L
Below 1 V
E14-24 (4) - E11-12 (E1)
B - BR
4 shift position switch signal
Ignition switch ON
Shift lever in 4
11 to 14 V
Ignition switch ON
Shift lever not in 4
Below 1 V

Waveform 1
C162170E06
Terminal
NT+ - NT-
Tool setting
1 V/DIV., 2 msec./DIV.
Vehicle condition
Engine is idling

Waveform 2
C189668E01
Terminal
SP2+ - SP2-
Tool setting
2 V/DIV., 20 msec./DIV.
Vehicle condition
Vehicle speed 20 km/h (12 mph)