SIDE AIRBAG SENSOR (for Access Cab) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT DOOR SCUFF PLATE |
![]() |
Disengage the 9 claws and clip, and remove the front door scuff plate.
| 3. REMOVE REAR DOOR SCUFF PLATE |
![]() |
Disengage the 7 claws and remove the rear door scuff plate.
| 4. REMOVE SIDE AIRBAG SENSOR ASSEMBLY |
![]() |
Slide the outer housing and disconnect the airbag connector.
Remove the bolt.
Disengage the guide and remove the side airbag sensor.