Home › BODY › EXTERIOR › WHEEL OPENING MOULDING

WHEEL OPENING MOULDING > INSTALLATION

for Preparation Click here



1. INSTALL QUARTER PANEL WHEEL OPENING MOULDING


    B087686E01
  1. for Type A:

    1. Install new No. 1 quarter panel moulding pad in the position shown in the illustration.



    2. B087687E01
    3. Install each clip in the position shown in the illustration.

      NOTICE:
      If you install the clips wrongly, the installation of the quarter panel wheel opening moulding would be improper.



    4. B087688E01
    5. Engage the 10 clips and install the quarter panel wheel opening moulding.

    6. Tighten the 5 screws.



    B087654E01
  1. for Type B:

    1. Install new No. 1 quarter panel moulding pad in the position shown in the illustration.

    2. Install the quarter panel wheel opening moulding with the 5 screws.



2. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY (for X-Runner)


    B087662E01
  1. Install new No. 2 body outside moulding pad in the position shown in the illustration.



    B087663E01
  1. Install each clip in the position shown in the illustration.

    NOTICE:
    If you install the clips wrongly, the installation of the body rocker panel moulding would be improper.



    B087664E01
  1. Engage the 3 claws and install the body rocker panel moulding.



    B087660E01
  1. Tighten the 3 screws.



3. INSTALL BACK DOOR OUTSIDE MOULDING SUB-ASSEMBLY (for X-Runner)


    B087667E01
  1. Install new No. 3 body outside moulding pad in the position shown in the illustration.



    B087668E01
  1. Install each clip in the position shown in the illustration.

    NOTICE:
    If you install the clips wrongly, the installation of the back door outside moulding would be improper.



    B087669E01
  1. Engage the 3 clips and install the back door outside moulding.



    B087665E01
  1. Tighten the 3 screws.



4. INSTALL REAR QUARTER PANEL MUDGUARD (w/ Rear Fender Mudguard)


    B087508E01
  1. for Type A:

    1. Install the rear quarter panel mudguard with the 3 screws.

    2. Install the 3 clips.



    B087509E01
  1. for Type B

    1. Install the rear quarter panel mudguard with the 3 screws.



5. INSTALL FRONT FENDER WHEEL OPENING MOULDING


    B087681E01
  1. for Type A:

    1. Install new No. 1 front fender wheel opening extension pad in the position shown in the illustration.



    2. B087682E01
    3. Install each clip in the position shown in the illustration.

      NOTICE:
      If you install the clip wrongly, the installation of the front fender wheel opening moulding would be improper.



    4. E212087
    5. Engage the 9 clips and install the front fender wheel opening moulding.

    6. Tighten the 4 screws.



    B087652E01
  1. for Type B:

    1. Install new No. 2 body outside moulding pad in the position shown in the illustration.

    2. Install the front fender wheel opening moulding with the 5 screws.

  1. w/o Front fender mudguard:

    1. Install the screw and the 3 clips.



6. INSTALL ROCKER PANEL MOULDING (for X-Runner)


    B087657E02
  1. Install new No. 1 body outside moulding pad in the position shown in the illustration.



    B087658E02
  1. Install each clip in the position shown in the illustration.

    NOTICE:
    If you install the clips wrongly, the installation of the rocker panel moulding would be improper.



    B087659E01
  1. Engage the 9 clips and install the rocker panel moulding.



    B087655E01
  1. Tighten the 4 screws.



7. INSTALL FRONT FENDER MUDGUARD (w/ Front Fender Mudguard)


    B087507E01
  1. Install the front fender mudguard with the 3 screws.

  1. Install the 3 clips.



8. INSTALL FRONT BUMPER EXTENSION
  1. for Type A:

    1. Install the front bumper with the 7 retainers.

    2. Tighten the screw.

  1. for Type B:

    1. Install the front bumper with the 5 retainers.

    2. Tighten the screw.



    E232397E01
  1. Tighten the 2 screws.

  1. Install the pin hold clip.
    Text in Illustration 
    *a
    CORRECT
    *b
    INCORRECT

    NOTICE:
    Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.



9. INSTALL FRONT SPOILER COVER (for X-Runner)
  1. Install the front spoiler cover with the 6 retainers.

  1. Install the 3 clips and the retainer.