Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › CLUTCH

CLUTCH > SERVICE DATA



Pedal height from asphalt sheet
-
168.5 to 178.5 mm (6.634 to 7.028 in.)
Clutch pedal free play
-
5.0 to 15.0 mm (0.197 to 0.591 in.)
Clutch pedal push rod play at pedal top
-
1.0 to 5.0 mm (0.039 to 0.197 in.)
Disc rivet head depth
Maximum
0.3 mm (0.012 in.)
Flywheel sub-assembly runout
Maximum
0.1 mm (0.004 in.)
Clutch release point from pedal full stroke end position
-
25 mm (0.984 in.) or more
Clutch cover
Minimum depth
Minimum width
0.5 mm (0.020 in.)
6.0 mm (0.236 in.)
Clutch disc runout
Minimum
1.0 mm (0.039 in.)
Clutch start cancel switch
Resistance
S/W OFF 2 - 4
2 - 4 (Apply battery voltage to terminals 1 and 3)
S/W ON 2 - 4 (Apply battery voltage to terminals 1 and 3)
10 kΩ or higher
10 kΩ or higher
Below 1 Ω