Home › BRAKE › BRAKE CONTROL › DOWNHILL ASSIST CONTROL SWITCH

DOWNHILL ASSIST CONTROL SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL DOWNHILL ASSIST CONTROL SWITCH


    C189370
  1. Attach the 2 claws to install the downhill assist control switch into the lower No. 1 instrument panel finish panel.

  1. Connect the downhill assist control switch connector.



2. INSTALL INSTRUMENT PANEL BOX


    B203557E01
  1. Push the stoppers through the cutouts, lower the instrument panel box, and engage the hinges to install the instrument panel box.

  1. close the instrument panel box.