Home › BRAKE › BRAKE CONTROL › DOWNHILL ASSIST CONTROL SWITCH

DOWNHILL ASSIST CONTROL SWITCH > REMOVAL

for Preparation Click here



1. REMOVE INSTRUMENT PANEL BOX


    B203558E01
  1. Open the instrument panel box.

  1. Disengage the 2 hinges, move the instrument panel box upward, and pull the stopper through the cutouts to remove the instrument panel box.



2. REMOVE DOWNHILL ASSIST CONTROL SWITCH
  1. Disconnect the downhill assist control switch connector.



    C189370
  1. Disengage the 2 claws and remove the downhill assist control switch from the lower No. 1 instrument panel finish panel.