Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › 2TR-FE STARTING

2TR-FE STARTING > SERVICE DATA



Starter assembly
Specified current
100 A or less at 11.5 V
Starter armature assembly
Resistance
Segment - Segment
1 Ω or lower
Commutator-Armature coil core
10 kΩ or higher
Diameter
Standard
35.0 mm (1.378 in.)
Minimum
34.0 mm (1.339 in.)
Undercut depth
Standard
0.7 mm (0.028 in.)
Minimum
0.2 mm (0.008 in.)
Starter yoke assembly
Brush length
Standard
15.0 mm (0.591 in.)
Minimum
9.0 mm (0.354 in.)
Resistance
Lead wire - brush
Standard
1 Ω or lower
Shunt coil
Standard
1.5 to 1.9 Ω at 20°C (68°F)
Starter brush holder assembly
Resistance
Standard
10 kΩ or higher
Spring load
Standard
21.5 to 27.5 N (2.2 to 2.8 kgf, 4.8 to 6.2 lbf)
Minimum
12.7 N (1.3 kgf, 2.9 lbf)
Starter relay
Resistance (3-5)
Standard
10 kΩ or higher
Below 1 Ω (Apply battery voltage to terminal 1 and 2)
Ignition switch
Resistance
LOCK
10 kΩ or higher
ACC
Below 1 Ω
ON
Below 1 Ω
START
Below 1 Ω