AUDIO AND VISUAL SYSTEM > Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter |


| 1.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY) |
Disconnect the R3 radio receiver assembly connector.
w/o USB Audio System
Disconnect the N2 No. 1 stereo jack adapter assembly connector.
w/ USB Audio System
Disconnect the N3 No. 1 stereo jack adapter assembly connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| R3-19 (AUXI) - N2-4 (AUXO) | Always | Below 1 Ω |
| R3-15 (ARI) - N2-2 (ARO) | Always | Below 1 Ω |
| R3-17 (ALI) - N2-1 (ALO) | Always | Below 1 Ω |
| R3-16 (ASGN) - N2-3 (ASGN) | Always | Below 1 Ω |
| R3-18 (AGND) - N2-5 (AGND) | Always | Below 1 Ω |
| R3-19 (AUXI) - Body ground | Always | 10 kΩ or higher |
| R3-15 (ARI) - Body ground | Always | 10 kΩ or higher |
| R3-17 (ALI) - Body ground | Always | 10 kΩ or higher |
| R3-16 (ASGN) - Body ground | Always | 10 kΩ or higher |
| R3-18 (AGND) - Body ground | Always | 10 kΩ or higher |
| Tester Connection | Condition | Specified Condition |
| R3-19 (AUXI) - N3-7 | Always | Below 1 Ω |
| R3-15 (ARI) - N3-8 | Always | Below 1 Ω |
| R3-17 (ALI) - N3-6 | Always | Below 1 Ω |
| R3-16 (ASGN) - N3-5 | Always | Below 1 Ω |
| R3-18 (AGND) - N3-9 | Always | Below 1 Ω |
| R3-19 (AUXI) - Body ground | Always | 10 kΩ or higher |
| R3-15 (ARI) - Body ground | Always | 10 kΩ or higher |
| R3-17 (ALI) - Body ground | Always | 10 kΩ or higher |
| R3-16 (ASGN) - Body ground | Always | 10 kΩ or higher |
| R3-18 (AGND) - Body ground | Always | 10 kΩ or higher |
|
| ||||
| OK | ||
| ||