NAVIGATION SYSTEM > Navigation Voice Circuit between Radio Receiver and Extension Module |

| 1.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - EXTENSION MODULE) |
Disconnect the R19 radio and display receiver assembly connector.
Disconnect the E15 extension module connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| R19-22 (VOL+) - E15-31 (VOL+) | Always | Below 1 Ω |
| R19-23 (VOL-) - E15-30 (VOL-) | Always | Below 1 Ω |
| R19-24 (SHD1) - E15-29 (SHD1) | Always | Below 1 Ω |
| R19-22 (VOL+) - Body ground | Always | 10 kΩ or higher |
| R19-23 (VOL-) - Body ground | Always | 10 kΩ or higher |
| R19-24 (SHD1) - Body ground | Always | 10 kΩ or higher |
|
| ||||
| OK | ||
| ||