Home › BODY ELECTRICAL › AUDIO / VISUAL › ROOF SPEAKER (for Access Cab)

ROOF SPEAKER (for Access Cab) > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT ROOF SPEAKER ASSEMBLY


B138420E01

HINT:
Remove interior parts so that the roof speaker can be seen.

  1. Check the speaker installation.

    OK:
    The speaker is securely installed.

    If the result is not as specified, replace the roof headlining assembly.

    HINT:
    Because the roof speaker cannot be removed individually, replace the entire roof headlining assembly.

  1. Visually check the speaker.

    OK:
    The metal arm of speaker is not bent.
    The screw of speaker is not loosened.

    If the result is not as specified, replace the roof headlining assembly.

    HINT:
    Because the roof speaker cannot be removed individually, replace the entire roof headlining assembly.

  1. Check the resistance.

    1. Disconnect the speaker connector.

    2. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester connection
      Specified Condition
      1 - 2
      Approximately 4 Ω

      If the result is not as specified, replace the roof headlining assembly.

      HINT:
      Because the roof speaker cannot be removed individually, replace the entire roof headlining assembly.