Home › BODY ELECTRICAL › LIGHTING › SIDE TURN SIGNAL LIGHT ASSEMBLY

SIDE TURN SIGNAL LIGHT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    E232398E01
  1. Apply battery voltage to the connector and check the side turn signal light comes on.
    Text in Illustration 
    *a
    Component without harness connected
    (Side Turn Signal Light Assembly LH)

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → 1
    Battery negative (-) → 2
    Side turn signal light comes on

    If the result is not as specified, replace the side turn signal light assembly LH.



2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH


    E232398E01
  1. Apply battery voltage to the connector and check the side turn signal light comes on.
    Text in Illustration 
    *a
    Component without harness connected
    (Side Turn Signal Light Assembly RH)

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → 1
    Battery negative (-) → 2
    Side turn signal light comes on

    If the result is not as specified, replace the side turn signal light assembly RH.