Home › BODY ELECTRICAL › LIGHTING › SIDE TURN SIGNAL LIGHT ASSEMBLY

SIDE TURN SIGNAL LIGHT ASSEMBLY > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. REMOVE OUTER MIRROR COVER


    E212106
  1. Disengage the 8 claws and remove the outer mirror cover.



2. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY


    E212107
  1. Remove the 2 screws.

  1. Disengage the 2 guides and remove the side turn signal light assembly.

  1. Disconnect the connector.