Home › SECURITIES › ENGINE IMMOBILISER › TRANSPONDER KEY AMPLIFIER

TRANSPONDER KEY AMPLIFIER > REMOVAL

for Preparation Click here



1. REMOVE LOWER NO. 2 STEERING WHEEL COVER


    F052155E02
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the lower No. 2 steering wheel cover.



2. REMOVE LOWER NO. 3 STEERING WHEEL COVER


    F052156E02
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the lower No. 3 steering wheel cover.



3. REMOVE LOWER STEERING COLUMN COVER


    F051318E02
  1. Remove the 2 screws.

  1. Disengage the 2 claws to remove the lower steering column cover.



4. REMOVE TRANSPONDER KEY AMPLIFIER


    F051331E01
  1. Widen the claw hung on the upper bracket by approximately 1.0 mm (0.039 in.) using a screwdriver.

  1. Pull the transponder key amplifier toward the rear of the vehicle with the claw open.

    NOTICE:
    Take care not to apply excessive force to prevent the case from being damaged.