Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › TELEVISION CAMERA

TELEVISION CAMERA > INSTALLATION



1. INSTALL TELEVISION CAMERA ASSEMBLY


E168709
  1. Connect the connector.

  1. Install the television camera with the 2 bolts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }



2. INSTALL TAIL GATE SERVICE HOLE COVER


B088130
  1. Using a "TORX" socket wrench T30, install the tail gate service hole cover with the 8 screws.



3. INSTALL TAIL GATE PROTECTOR RH


B088129E01
  1. Engage the 10 claws and install the tail gate protector.



    B088128
  1. Using a "TORX" socket wrench T30, tighten the 7 tail gate protector screws.